Prosus S13/S14 Coilover Adapter Kit

Prosus S13/S14 Coilover Adapter Kit

This kit allows you to bolt an S13 or S14 front coilover into almost any Cressida or Celica chassis including X3, X6, X7, X8, and A60.

This also applies to any rear wheel drive Toyota car with a 1.75"id strut tube. This part may also work on other Toyotas and Datsuns but please inquire if you have questions about your application.

*This part requires you to cut your existing strut tube off and weld our adapter inside. Please consult a professional about welding to ensure maximum safety*

*Depending on the application you may be required to modify your strut tower holes to accept the S13/S14 top hats or change to top hats designed for your chassis*

*Depending on the ride height the coilover may contact the swaybar end links. This can be remedied by shortening the swaybar end links, adding a roll center adjuster or removing the swaybar altogether*

Installation instructions: https://youtu.be/RCD2Xe29Ur8

Kit includes:
2x strut adapters
4x 12mm bolts for coilover - knuckle
4x nuts for coilover - knuckle
1x bolt with jam nut for camber adjustment
1x bolt to hold alignment during the welding process

Note: parts are not always in stock so please allow time for your parts to be made
-thanks